Regulating - Thermostats

13 Products

Thermostat switch (NC)

The mechanical NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The bimetal thermostat has a small hysteresis and an anti frost assurance.

FZK 011

Mechanical thermostat

The set value corresponds to the upper switching point, here the normally closed contact opens. The set value minus the switching temperature differential of 5 K (and tolerances) corresponds to the lower switching point, here the normally closed contact closes. The mechanical thermostat is used to control heating, cooling devices, filter fans or signal transmitters.

KTO 111

Thermostat switch (NC)

The mechanical NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The use of push-in terminals prevents the supply lines from coming loose.

ET 011

Electronic thermostat

Electronic thermostat for controlling electrical DC 24 V devices with high power. Heaters, cooling devices or signal transmitters can be switched via the potential-free changeover contact. In contrast to mechanical thermostats, the ET 011 is characterized by a low hysteresis (= switching temperature differential). This results in more precise temperature control.

REX 011

Explosion-proof thermostat

Ex-protected thermostat of temperature class T6 (max. 85 °C). High switching capacity for direct control of connected heaters. Application: Enclosures and control cabinets in explosive environments. Mechanical thermostat with high response accuracy and response speed.

STS 011

Thermostat switch (NO)

The mechanical thermostat NO (normally open) closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The bimetal thermostat has a small hysteresis.

ETR 011

Electronic thermostat

Electronic thermostat for controlling heating, cooling devices, filter fans or signal transmitters. Detects the ambient temperature and switches via the output relays with changeover contact. If, for example, a heating system is in operation, the integrated LED lights up.

ZR 011

Dual thermostat

A thermostat with a normally closed (NC) contact and a normally open (NO) contact in a single casing. Unlike thermostats with a changeover contact, this dual thermostat operates independently. This allows heating devices and cooling devices to be switched within different temperature ranges.

FTS 011

Tamper-proof thermostat (NO)

The NO thermostat closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The temperature is permanently set. This gives you a high switching accuracy.

FTO 011

Tamper-proof thermostat (NC)

The NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The temperature is permanently set. This gives you a high switching accuracy.

FTD 011

Tamper-proof dual thermostat

Fixed thermostat normally closed (NC) and normally open (NO) contacts in one casing. Unlike thermostats with changeover contacts, the double thermostat switches independently. This allows heating and cooling devices to be switched in different temperature ranges.

DCT 010

Electronic thermostat

Electronic thermostat with integrated switch module for controlling DC devices in enclosures and casings. Switches all common loads in enclosure applications: Heating, fans, signal transmitters, etc. Normally open versions (NO) in two versions with a wide temperature setting range. Normally closed versions (NC) with secondary switch function: 65 % RH fixed setting.

KTS 111

Thermostat switch (NO)

The mechanical NO thermostat closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The use of push-in terminals prevents the supply lines from coming loose.

Regulating - Thermostats

Thermostat switch (NC)

Mechanical thermostat

Thermostat switch (NC)

Electronic thermostat

Explosion-proof thermostat

Thermostat switch (NO)

Electronic thermostat

Dual thermostat

Tamper-proof thermostat (NO)

Tamper-proof thermostat (NC)

Tamper-proof dual thermostat

Electronic thermostat

Thermostat switch (NO)

Calculation tool

Innovation and Safety

Talk to an expert

Your direct contact

Stego Worldwide