Regulating - Thermostats

13 Products

Dual thermostat

Thermostat contact breaker (NC, normally closed) and thermostat normally open contact (NO, normally closed) in one casing. Unlike thermostats with change-over contact, the double thermostat switches independently. This allows heating and cooling devices to be switched in different temperature ranges.

FTS 011

Tamper-proof thermostat (NO)

The NO thermostat closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The temperature is permanently set. This gives you a high switching accuracy.

FTO 011

Tamper-proof thermostat (NC)

The NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The temperature is permanently set. This gives you a high switching accuracy.

ET 011

Electronic thermostat

Electronic thermostat for controlling DC 24 V electrical devices with high power. Heaters, cooling devices or signal transmitters can be switched via the potential-free change-over contact. In contrast to mechanical thermostats, the ET 011 is characterised by a low hysteresis (= switching temperature differential). This ensures more precise temperature control.

STS 011

Thermostat switch (NO)

The mechanical thermostat NO (normally open) closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The bimetal thermostat has a small hysteresis.

ETR 011

Electronic thermostat

Electronic thermostat for controlling heating, cooling devices, filter fans or signal transmitters. Detects the ambient temperature and switches via the output relays with change-over contact. If, for example, a heating system is in operation, the integrated LED lights up.

STO 011

Thermostat switch (NC)

The mechanical NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The bimetal thermostat has a small hysteresis and an anti frost assurance.

FZK 011

Mechanical thermostat

The set value corresponds to the upper switching point, here the contact breaker opens. The set value minus the switching temperature differential of 5 K (and tolerances) corresponds to the lower switching point, here the contact breaker closes. The mechanical thermostat is used to control heating, cooling devices, filter fans or signal transmitters.

REX 011

Explosion-proof thermostat

Ex-protected thermostat of temperature class T6 (max. 85 °C). High switching capacity for direct control of connected heaters. Application: Enclosures and control cabinets in explosive environments. Mechanical thermostat with high response accuracy and response speed.

FTD 011

Tamper-proof dual thermostat

Fixed thermostat contact breaker (NC) and thermostat normally open contact (NO) in one casing. Unlike thermostats with change-over contact, the double thermostat switches independently. This allows heating and cooling devices to be switched in different temperature ranges.

DCT 010

Electronic thermostat

Electronic thermostat with integrated switch module for controlling DC devices in enclosures and casings. Switches all common loads in enclosure applications: Heating, fans, signal transmitters, etc. Normally open versions (NO) in two versions with a wide temperature setting range. Normally closed versions (NC) with secondary switch function: 65 % RH fixed setting.

KTO 111

Thermostat switch (NC)

The mechanical NC thermostat opens when the temperature rises and is used to control heaters or to switch signal transmitters when the temperature undershoots. The use of push-in terminals prevents the supply lines from coming loose.

KTS 111

Thermostat switch (NO)

The mechanical NO thermostat closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The use of push-in terminals prevents the supply lines from coming loose.

Regulating - Thermostats

Dual thermostat

Tamper-proof thermostat (NO)

Tamper-proof thermostat (NC)

Electronic thermostat

Thermostat switch (NO)

Electronic thermostat

Thermostat switch (NC)

Mechanical thermostat

Explosion-proof thermostat

Tamper-proof dual thermostat

Electronic thermostat

Thermostat switch (NC)

Thermostat switch (NO)

Calculation tool

Innovation and Safety

Talk to an expert

Your direct contact

Stego Worldwide