THERMAL MANAGEMENT FOR OPTIMAL CLIMATE CONTROL IN ENCLOSURES

Thermal management ensures the performance and reliability of electrical and electronic components. STEGO offers a comprehensive range of products for climate control in enclosures. These products reliably protect electronic components from condensation. This means that control cabinets and technical installation spaces are always kept at an optimum temperature.

STEGO enclosure heaters and filter fans heat and cool your control cabinet. Thermostats, hygrostats and sensors complete temperature and humidity control systems in your technical application. STEGO offers matching lighting and accessories such as LED enclosue lights, pressure compensation elements and sockets.

mfr012-1-mechanischer-hygrostat-mechanical-hygrostat-feature

Mechanical hygrostat

MFR 012

The hygrostat is used to prevent condensate and regulates heating and fans. From a critical relative air humidity of 65 %, the temperature is increased so that the dew point is raised.

Adjustable relative air humidity
Change-over contact (heating or cooling)
High switching performance
Clip fixing

Overview technical data

Product variants

Article number	Device type	Protection class	Protection type	Material hood	Filter material	Filter mat	Casing	AC/DC	工作电压	Operating voltage tolerance	频率	功耗	Axial fan	Cooling airflow rate outlet filter	Cooling airflow rate blowing	Average emission sound pressure level	Service life	Operating temperature	Operating humidity	Storage humidity	Storage temperature	Torque	Connection	Height	Width	Depth	Installation depth	Weight	Mounting cut-out	Item number accessories 1	Item number accessories 2	Item number accessories 3	Accessory 1	Accessory 2	Accessory 3	Note	Protection type UL	Follow-up article	Heater element	Inrush current	Recommended backup fuse	Heating capacity	Connection type	Mounting	Switch	Illuminant	Socket	Luminous colour	Luminous flux	Operating socket	Nominal current socket	Measurement signal	Electrical protection	Measurement range	Measurement range tolerance	Measurement range 2	Measurement range 2 tolerance	Load resistance external	响应时间	Design	Temperature monitoring	Connection case	Setting range	Contact type	Inrush current duration	Switching capacity	Switching current ohmic	Reference voltage ohmic	Drill hole spacing	Switching differential	Switching differential tolerance	操作显示	Reference voltage 2 ohmic	开关电感电流	reference_voltage_inductive	参考电压 2	Switching current dc ohmic	Reference voltage dc ohmic	setting_range_2	开关切换差异 2	开关切换差异 2 公差	Reference voltage	Switching current	CCC
01260.0-01	恒温恒湿器	II	IP20	Plastic to UL94 V-0, light grey	Plastic fibre with progressive structure	G3	符合 UL94 V-0 标准的塑料，浅灰色	AC/DC	24 V - 240 V	22 V - 265 V	45-65 赫兹	1 W	160 m³/h	166 m³/h	345 m³/h	55 dB(A)	>30000 个周期	-40 °C - 70 °C	≤95 %相对湿度	≤95 %相对湿度	-45 °C - 85 °C	0,8 Nmmax.	5 极接线端子，最大夹紧力矩 0.5 Nm：带 2.5 mm² （AWG 14）电线末端铁箍的多股线/绞合线	101 毫米	35 毫米	69,5 毫米	52 mm	200 g	246 x 246 mm							开关欧姆负载（开关电感负载）。与多股线连接时必须使用电线末端铁箍。	NEMA Type 12	06402.0-00	Aluminium profile	30 A	16 A	200 W	Connection terminal	用于 35 毫米 DIN 导轨的夹子，符合 EN 60715 标准															3 s	转换器	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	0 °C - 60 °C	继电器	10 s	13 A (CC)	16 A	240 VAC	5.9 in	2 K	± 1 K	发光二极管	120 VAC	1,6 A	240 VAC	120 VAC	0,6 A	60 VDC	50 %相对湿度 - 90 %相对湿度	4 %相对湿度	± 1 %相对湿度
01220.0-00	Hygrostat	II	IP20	Plastic to UL94 V-0, light grey	Plastic fibre with progressive structure	G3	Plastic to UL94 V-0, light grey	AC;DC	24 V - 240 V	AC 250 V (VDE), AC 120 V (UL) V	45-65 赫兹	1 W	160 m³/h	137 m³/h	300 m³/h	55 dB(A)	>50000 cycles	0 °C - 60 °C	≤95 % RH	≤95 % RH	-40 °C - 60 °C	0,5 Nmmax.	3-polige Klemme, Anzugsmoment 0,5 Nm max.: Starrdrahtleitung 2,5 mm² (AWG 14) Litzenleitung² 1,5 mm² (AWG 16)	67 mm	50 mm	38 mm	52 mm	60 g	246 x 246 mm	267071	267072	267126	external sensor, 1m	external sensor, 2m	external sensor, 3m	Switching differential referred to 50 % rH. Wire end ferrules must be used for connections with stranded wires.	NEMA Type 12	01250.0-00	Aluminium profile	16 A	16 A	200 W	Connection terminal	Clip for 35 mm DIN rail, EN 60715	On/off switch and motion detector	LED	CH	6000 - 7000 K	560 Lm	250 V	10 A	Temperature, air humidity	Reverse polarity protection, short-circuit proof, overvoltage protection	-40 °C - 60 °C	± 1 K	0 % RH - 100 % RH	± 4 %	≤ 500 Ω	3 s	Change-over contact	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	35 % RH - 95 % RH	Snap-action contact	10 s	AC 5 A;DC 20 W	5 A	250 VAC	5.9 in	4 % RH	± 3 % RH	发光二极管	120 VAC	1,6 A	240 VAC	120 VAC	0,6 A	30 VDC	50 %相对湿度 - 90 %相对湿度	4 %相对湿度	± 1 %相对湿度	20 V	0,1 A	CQC
02034.0-00	Convection heaters	I	IP66					AC	230 V	208 V - 253 V	50;60 Hz						>50000 h	-76 °F - 185 °F	≤90 % rF	≤90 % rF	-76 °F - 185 °F	0,8 Nmmax.	Halogen-free silicone cable 3 x 0.75 mm², 1 m	9.4 in	2.4 in	4.7 in		60 oz		09024.0-00			Screw fixing			Other voltages on request;When operating below AC/DC 140 V, the heating capacity is reduced by approx. 10 %.		16504.0-00	Aluminium profile, silver anodised	9 A	2 A	200 W	Connection cable	Clip for 35 mm DIN rail;Screw fixing																	Protección contra sobrecalentamiento en caso de fallo del ventilador con reset automático	Plastic to UL94 V-0, black							11.8 in
02034.9-00	Convection heaters	I	IP66					AC	120 V	108 V - 132 V	50;60 Hz						>50000 h	-76 °F - 185 °F	≤90 % rF	≤90 % rF	-76 °F - 185 °F	0,8 Nmmax.	Halogen-free silicone cable 3 x 0.75 mm², 1 m	9.4 in	2.4 in	4.7 in		60 oz								Calefacción con ventilador;La calefacción sólo debe funcionar en combinación con un ventilador. Existe peligro de sobrecalentamiento.			Aluminium profile, silver anodised		4 A	200 W	Connection cable	Clip for 35 mm DIN rail;Screw fixing																	Protección contra sobrecalentamiento en caso de fallo del ventilador con reset automático	Plástico según UL94 V-0, negro							11.8 in
02035.0-10	Convection heaters	I	IP66					AC	230 V	208 V - 253 V	50;60 Hz						>50000 h	-76 °F - 185 °F	≤90 % rF	≤90 % rF	-76 °F - 185 °F	0,8 Nmmax.	Halogen-free silicone cable 3 x 0.75 mm², 1 m	8.7 in	3.1 in	6.3 in		81.1 oz								Calefacción con ventilador;La calefacción sólo debe funcionar en combinación con un ventilador. Existe peligro de sobrecalentamiento.			Aluminium profile, silver anodised		2.5 A	250 W	Connection cable	Screw fixing																	Protección contra sobrecalentamiento en caso de fallo del ventilador con reset automático	Plástico según UL94 V-0, negro							10.8 in
02035.9-10	Convection heaters	I	IP66					AC	120 V	108 V - 132 V	50;60 Hz						>50000 h	-76 °F - 185 °F	≤90 % rF	≤90 % rF	-76 °F - 185 °F	0,8 Nmmax.	Halogen-free silicone cable 3 x 0.75 mm², 1 m	8.7 in	3.1 in	6.3 in		81.1 oz								Calefacción con ventilador;La calefacción sólo debe funcionar en combinación con un ventilador. Existe peligro de sobrecalentamiento.			Aluminium profile, silver anodised		5 A	250 W	Connection cable	Screw fixing																	Protección contra sobrecalentamiento en caso de fallo del ventilador con reset automático	Plástico según UL94 V-0, negro							10.8 in
13092.1-13	Fan heater;DC applications;Integrated control;Touchsafe	II	IP20		Plastic fibre with progressive structure	G3	Plastic to UL94 V-0, black	DC	24 V	22 V - 26 V	50;60 Hz	1 W	160 m³/h		500 m³/h	67 dB(A)	>50000 h	-45 °C - 70 °C	≤90 % RH	≤90 % RH	-45 °C - 70 °C	0,8 Nmmax.	2-pole "push-in" connection terminal Stranded wire1 1.5 mm² (AWG 16) with strain relief; max. 2.5 mm² (AWG 12)	99 mm	168 mm	179 mm	107 mm	1300 g	246 x 246 mm	267071	267072	267126	external sensor, 1m	external sensor, 2m	external sensor, 3m	Fan heater with thermostat;other designs (heating capacities, setting ranges) and operating voltage DC 48 V on request;tolerance ±1 K		06403.0-00	Aluminium profile	30 A	16 A	200 W	Connection terminal	Clip for 35 mm DIN rail;Screw fixing																Fan heater with integrated thermostat with connection for external temperature sensor	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	-20 °C - 40 °C	MOSFET	10 s	11 A (CC)	11 A	20...56 VDC	8.9 in	3 K
13095.3-03	Fan heater;DC applications;Integrated control;Touchsafe	II	IP20		Plastic fibre with progressive structure	G3	Plastic to UL94 V-0, black	DC	56 V	61 V - 51 V	50;60 Hz	85 W	160 m³/h		575 m³/h	67 dB(A)	>50000 h	-45 °C - 70 °C	≤90 % RH	≤90 % RH	-45 °C - 70 °C	0,8 Nmmax.	2-pole "push-in" connection terminal Stranded wire1 1.5 mm² (AWG 16) with strain relief; max. 2.5 mm² (AWG 12)	99 mm	168 mm	179 mm	107 mm	1300 g	246 x 246 mm	267071	267072	267126	external sensor, 1m	external sensor, 2m	external sensor, 3m	Fan heater with thermostat;other designs (heating capacities, setting ranges) and operating voltage DC 48 V on request;tolerance ±1% rH		16501.0-00	Aluminium profile	2,5 A	20 A	600 W	Connection terminal	Clip for 35 mm DIN rail;Screw fixing																Fan heater with integrated hygrostat with connection for external humidity sensor	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	40 % RH - 90 % RH						8.9 in	4 % RH
13097.3-12	Fan heater;DC applications;Integrated control;Touchsafe	II	IP20				Plastic to UL94 V-0, black	DC	56 V	61 V - 51 V	50;60 Hz		160 m³/h				>50000 h	-45 °C - 70 °C	≤90 % RH	≤90 % RH	-45 °C - 70 °C	0,8 Nmmax.	2-pole "push-in" connection terminal Stranded wire1 1.5 mm² (AWG 16) with strain relief; max. 2.5 mm² (AWG 12)	99 mm	168 mm	179 mm		1300 g								Fan heater with thermostat;other designs (heating capacities, setting ranges) and operating voltage DC 48 V on request;tolerance ±1 K		16502.0-00	Aluminium profile	4 A	20 A	800 W	Connection terminal	Clip for 35 mm DIN rail;Screw fixing																Fan heater with integrated thermostat with internal temperature sensor	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	-20 °C - 40 °C						8.9 in	3 K
13097.3-13	Fan heater;DC applications;Integrated control;Touchsafe	II	IP20				Plastic to UL94 V-0, black	DC	56 V	61 V - 51 V	50;60 Hz		160 m³/h				>50000 h	-45 °C - 70 °C	≤90 % RH	≤90 % RH	-45 °C - 70 °C	0,8 Nmmax.	2-pole "push-in" connection terminal Stranded wire1 1.5 mm² (AWG 16) with strain relief; max. 2.5 mm² (AWG 12)	99 mm	168 mm	179 mm		1300 g		267071	267072	267126	external sensor, 1m	external sensor, 2m	external sensor, 3m	Fan heater with thermostat;other designs (heating capacities, setting ranges) and operating voltage DC 48 V on request;tolerance ±1 K		16503.0-00	Aluminium profile	4,5 A	20 A	800 W	Connection terminal	Clip for 35 mm DIN rail;Screw fixing																Fan heater with integrated thermostat with connection for external temperature sensor	Overheating protection in the event of fan failure with automatic reset, additional contactor with irreversible fuse	Plastic to UL94 V-0, black	-20 °C - 40 °C						8.9 in	3 K

THERMAL MANAGEMENT FOR OPTIMAL CLIMATE CONTROL IN ENCLOSURES

OUR PRODUCTS

SOLUTIONS FOR PERFECT THERMAL MANAGEMENT

TO PRODUCT FINDER

Heating

Cooling

Regulating

Measuring

Lighting

Accessories

Mechanical hygrostat

MFR 012

Overview technical data

Product variants

Certificates

Your direct contact

Stego Worldwide