Suche
RC016-1-flat-enclosure-heater-feature
rc016-2-flat-enclosure-heater-technical-drawing
RC016-1-flat-enclosure-heater-wiring-diagram

Flat enclosure heater

RC 016

Contact heater for use in small casings if the temperature must not fall below a minimum temperature and condensation is to be prevented. The heaters are designed for continuous operation.

  • Wide voltage range for electrical connection
  • PTC heating element with dynamic response behavior
  • Compact dimensions, use: e.g. as a camera heater
  • High heating capacity per volume
CEUKCAEACULVDE

Overview technical data

Device typeConvection heaters
Protection classII
Protection typeIP54
Heating elementPTC resistor (PTC)
Heater elementAluminium profile, anodised
AC/DCAC;DC
Operating voltage120 V - 240 V
Operating voltage tolerance110 V - 265 V
Frequency50;60 Hz
Operating temperature-49 °F - 158 °F
Operating humidity≤90 % rF
Storage humidity≤90 % rF
Storage temperature-49 °F - 158 °F
Connection typeConnection cable
MountingScrew fixing
Installation positionvariable
Height0.5 in
Width1 in
NoteOther voltages on request;Heating capacity measured at +20°C (+68°F) ambient temperature;When operating under AC/DC 140 V, the heating capacity is reduced by approx. 10 %.

Product variants

Article numberFollow-up articleInrush currentRecommended backup fuseHeating capacitySurface temperatureConnectionDepthWeightInteractions
01602.0-0001651.0-002 A2 A8 W< + 329 °F2x AWG 18 stranded wire1.2 in0.7 oz
01609.0-0001662.0-002.5 A4 A10 W< + 311 °F2x AWG 22 cable (silicone)2 in0.7 oz
01610.0-0001673.0-002.5 A4 A13 W< + 338 °F2x AWG 22 cable (silicone)2.4 in1.4 oz

Certificates

Your direct contact

STEGO, Inc.
95 Chastain Road NW
Suite 200 Kennesaw
GA 30144 USA