STEGO enclosure heaters and filter fans heat and cool your control cabinet. Thermostats, hygrostats and sensors complete temperature and humidity control systems in your technical application. STEGO offers matching lighting and accessories.
Suche
RC016-1-flat-enclosure-heater-feature
rc016-2-flat-enclosure-heater-technical-drawing
RC016-1-flat-enclosure-heater-wiring-diagram

Flat enclosure heater

RC 016

Contact heater for use in small casings if the temperature must not fall below a minimum temperature and condensation is to be prevented. The heaters are designed for continuous operation.

  • Wide voltage range for electrical connection
  • PTC heating element with dynamic response behaviour
  • Compact dimensions, use: e.g. as a camera heater
  • High heating capacity per volume
CEUKCAEACULVDE

Overview technical data

Device typeConvection heaters
Protection classII
Protection typeIP54
Heating elementPTC thermistor (PTC)
Heater elementAluminium profile, anodised
AC/DCAC;DC
Operating voltage120 V - 240 V
Frequency50;60 Hz
Operating temperature-45 °C - 70 °C
Operating humidity≤90 % RH
Storage humidity≤90 % RH
Storage temperature-45 °C - 70 °C
Connection typeConnection cable
MountingScrew fixing
Installation positionVariable
Height12,5 mm
Width25 mm
NoteOther voltages on request;Heating capacity measured at +20 °C (+68 °F) ambient temperature;When operating under AC/DC 140 V, the heating capacity is reduced by approx. 10 %.

Product variants

Article numberInrush currentHeating capacitySurface temperatureConnectionDepthWeightInteractions
01602.0-002 A8 W< + 165 °C2x AWG 18 stranded wire30 mm20 g
01609.0-002,5 A10 W< + 155 °C2x AWG 22 cable (silicone)50 mm20 g
01610.0-002,5 A13 W< + 170 °C2x AWG 22 cable (silicone)60 mm40 g

Certificates