The hygrostat is used to prevent condensate and regulates heating and fans. From a critical relative air humidity of 65 %, the temperature is increased so that the dew point is raised.
| Device type | Hygrostat |
| Setting range | 30 % rF - 95 % rF |
| Contact type | Snap-action contact |
| Protection type | IP30 |
| Casing | Plastic to UL94 V-0, light grey |
| AC/DC | AC |
| Operating voltage tolerance | AC 250 V |
| Inrush current | 16 A |
| Inrush current duration | 10 s |
| Switching capacity | AC 5 A;DC 20 W |
| Switching current ohmic | 10 A |
| Reference voltage ohmic | 250 VAC |
| Reference voltage 2 ohmic | 120 VAC |
| Switching current dc ohmic | 0.6 A |
| Reference voltage dc ohmic | 30 VDC |
| Reference voltage | 20 V |
| Switching current | 0.1 A |
| Service life | 10 A; 10000 Zyklen 6 A; 50000 Zyklen |
| Switching differential | 4 % rF |
| Switching differential tolerance | ± 1,5 % rF |
| Operating temperature | 32 °F - 140 °F |
| Operating humidity | ≤95 % rF |
| Storage humidity | ≤95 % rF |
| Storage temperature | -40 °F - 140 °F |
| Connection type | Connection terminal (push-in) |
| Connection | 3 x stranded wire 1.0 - 2.5 mm² (with wire end ferrule) and rigid wire 1.0 - 2.5 mm² |
| Design | Changer |
| Mounting | Clip for 35 mm DIN rail, EN 60715 |
| Height | 3.3 in |
| Width | 1.4 in |
| Depth | 1.7 in |
| Weight | 1.6 oz |
| Note | Switching differential related to 50 % rH. Wire end ferrules must be used for connections with stranded wires. |
Heating
Cooling
Regulating
Lighting
