The NO thermostat closes when the temperature rises and is used to control filter fans, heat exchangers, cooling devices or to switch signal transmitters when the temperature is exceeded. The temperature is permanently set. This gives you a high switching accuracy.
| Device type | Thermostats |
| Setting range | firm |
| Contact type | Snap-action contact |
| Sensor | Thermostatic bimetal |
| Protection type | IP20 |
| Casing | Plastic to UL94 V-0, light grey |
| AC/DC | AC;DC |
| Operating voltage tolerance | AC 250 V (VDE), AC 120 V (UL) V |
| Inrush current | 16 A |
| Inrush current duration | 10 s |
| Switching capacity | AC 250 V: 5 (1.6) A; AC 120 V: 10 (2) A; DC 24-72V: 30 W |
| Switching current ohmic | 5 A |
| Switching current 2 ohmic | 10 A |
| Reference voltage ohmic | 250 VAC |
| Reference voltage 2 ohmic | 120 VAC |
| Switching current inductive | 1.6 A |
| Switching current 2 inductive | 2 A |
| reference_voltage_inductive | 250 VAC |
| Reference voltage 2 | 120 VAC |
| Switching current dc ohmic | 1 A |
| Reference voltage dc ohmic | 30 VDC |
| Minimal switching capacity | 0.48 W |
| Reference voltage | 24 V |
| Switching current | 20 mA |
| Service life | >100000 cycles |
| Operating temperature | -40 °F - 176 °F |
| Operating humidity | ≤90 % rF |
| Storage humidity | ≤90 % rF |
| Storage temperature | -49 °F - 176 °F |
| Torque | 0.8 Nmmax. |
| Connection | 2-pole clamp, torque 0.8 Nm max: Rigid wire/stranded wire 2.5 mm² (AWG 14) |
| Design | Normally open (NO) |
| Mounting | Clip for 35 mm DIN rail, EN 60715 |
| Height | 1.9 in |
| Width | 1.3 in |
| Depth | 1.3 in |
| Weight | 1.1 oz |
Heating
Cooling
Regulating
Lighting
