Enclosure heater

LTS 064

Compact heating for casings with electrical and electronic installations. The heater body in loop design improves convection. The plastic casing is designed so that the surface temperature on the touchable side surfaces does not exceed 80 °C. Pressure clamps enable quick and easy electrical connection.

Quick installation thanks to clip fixing and pressure clamp
Low surface temperature
Double insulated (plastic housing)
Wide voltage range
Heater body in loop design for optimum temperature distribution
Shock and vibration proof

Overview technical data

Device type	Convection heaters;Touchsafe
Protection class	II
Protection type	IP20
Heating element	PTC resistor (PTC)
Casing	Plastic to UL94 V-0, black and white
AC/DC	AC;DC
Operating voltage	120 V - 240 V
Operating voltage tolerance	110 V - 265 V
Frequency	50;60 Hz
Surface temperature	< + 80 °C
Operating temperature	-45 °C - 70 °C
Operating humidity	≤90 % RH
Storage humidity	≤90 % RH
Storage temperature	-45 °C - 70 °C
Connection type	Connection terminal
Connection	2 x pressure clamps for stranded wire 0.5 - 1.5 mm² (with wire end ferrule) and rigid wire 0.5 - 2.5 mm²
Mounting	Clip for 35 mm DIN rail
Installation position	Airflow direction "in" vertical / connection at the bottom
Height	105 mm
Width	38 mm
Depth	99 mm
Weight	200 g
Note	Surface temperature according to VDE 0100, excluding upper grid surface;Surface temperature according to VDE 0100, excluding upper grid surface;Heating capacity measured at +20°C (+68°F) ambient temperature.

Product variants

Article number	Inrush current	Recommended backup fuse	Heating capacity
06401.0-00	2 A	4 A	20 W
06402.0-00	2 A	4 A	30 W
06403.0-00	4 A	6 A	40 W

Enclosure heater

LTS 064

Overview technical data

Product variants

Certificates

Your direct contact

Stego Worldwide