Space-saving Ecoline LED enclosure lamp for use in enclosures, casings and technical installation spaces with high component density. High service life of the switch cabinet lamp (LED) of 60,000 hours, mounting by magnet, clip or screw fixing. Pressure clamps for the electrical connection and daisy chain.
Switching options: PIR motion detector, on/off switch, without switch (prepared for external switch)
Wide-range voltage
Luminous flux 400 Lm, daylight white: 6000 to 7000 K
Pressure clamp connections
Overview technical data
Illuminant
LED
Protection class
II
Protection type
IP20
Casing
Plastic, transparent
Frequency
50;60 Hz
Power consumption
<4 W
Luminous colour
6000 - 7000 K
Luminous flux
400 Lm
Service life
>60000 h
Operating temperature
-40 °C - 60 °C
Operating humidity
≤90 % RH
Storage humidity
≤90 % RH
Storage temperature
-40 °C - 85 °C
Connection type
Connector plug
Depth
351 mm
Weight
200 g
CCC
CCC approved
Product variants
Article number
Device type
Switch
AC/DC
Operating voltage
Operating voltage tolerance
Connection
Mounting
Height
Width
Note
Request
CAD
Datasheet
02540.3-13
LED enclosure lamps
On/off switch
AC
100 V - 240 V
90 V - 265 V
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm²
Magnet
36 mm
32 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Magnet
36 mm
32 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Magnet
36 mm
32 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Magnet
36 mm
32 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Magnet
36 mm
32 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
DC 90 - 110 V (min. DC 80 V, max. DC 125 V)
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Magnet
36 mm
32 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Screw
41 mm
52 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
2-pole Duo pressure clamp for rigid wire cable 2.5 mm²,
Stranded wire with wire end ferrule 1.5 mm
Clip
47.3 mm
40 mm
The light must not be used for household lighting
The light is simply snapped into the clip holder and can be rotated in both directions. With a total angle of rotation of 180°, this enables optimum illumination.
Heating
Cooling
Regulating
Lighting
