The IO-Link converter converts three analogue signals into the IO-Link protocol. This allows, for example, analogue sensors to be integrated into an existing IO-Link environment (retrofit).
| Device type | IO-Link products |
| Packaging unit | 1 Piece |
| Electrical protection | IO-Link: Reverse polarity protection, overvoltage protection |
| Protection class | III (SELV) |
| Protection type | IP65, IP66, IP67 |
| Material sealing | NBR |
| Casing | Stainless steel |
| AC/DC | DC |
| Operating voltage | 24 V |
| Nominal current | 62,5 mA |
| Frequency | 0 Hz |
| Power consumption | 1,5 W |
| Load resistance external | 250 Ohm |
| Operating temperature | -40 °C - 80 °C |
| Operating humidity | ≤90 % RH |
| Storage humidity | ≤90 % RH |
| Storage temperature | -40 °C - 85 °C |
| Connection type | M12 connector plug |
| Connection | IO-Link: Male connector M12 IEC61076-2-101 4-pole A-coded, Signal interface: Female connector M12 IEC61076-2-101 5-pole A-coded |
| Design | IO-Link version 1.1 |
| Mounting | Clip |
| Installation position | variable |
| Setup height | 4000 m |
| Height | Ø14 mm |
| Width | Ø14 mm |
| Depth | 63 mm |
| Weight | 50 g |
Heating
Cooling
Regulating
Lighting
