Enclosure heater with fan

CS 028

This compact enclosure heater with fan and PTC heating element prevents condensation in enclosures with a high component density. The touch-safe plastic casing ensures user safety by protecting against heat.

PTC heating element: temperature-limiting, direct response behaviour
Touch-safe heat protection
Screw fixing and mounting with clip fixing for DIN rail 35 mm possible
Electrical connection via pressure clamps
Temperature safety cut-out to prevent overheating

Overview technical data

Device type	Fan heater Touchsafe
Protection class	II
Protection type	IP20
Heating element	PTC resistor (PTC)
Casing	Plastic to UL94 V-0, black
AC/DC	AC
Recommended backup fuse	10 A
Frequency	50;60 Hz
Heating capacity minimum	150 W
Axial fan	13.8 m³/h
Service life	>40000 h
Operating temperature	-45 °C - 70 °C
Operating humidity	≤90 % RH
Storage humidity	≤90 % RH
Storage temperature	-45 °C - 70 °C
Connection type	Connection terminal
Torque	0.8 Nmmax.
Connection	2-pole clamp 2.5 mm², max. torque 0.8 Nm
Installation position	Airflow direction "in" vertical / connection at the bottom
Weight	300 g
Note	Other voltages on request Heating capacity at +20°C (+68°F) ambient temperature.

Product variants

Article number	Operating voltage minimum	Operating voltage tolerance	Inrush current maximum	Mounting	Height	Width	Depth	Datasheet
02800.0-00	230 V	208 V - 253 V	12 A	Clip for 35 mm DIN rail	75 mm	65 mm	92 mm	CS028-02800.0-00-Datasheet-EN-GB.pdf
02800.0-01	230 V	208 V - 253 V	12 A	Screw fixing	90 mm	85 mm	107 mm	CS028-02800.0-01-Datasheet-EN-GB.pdf
02800.9-00	120 V	108 V - 132 V	6 A	Clip for 35 mm DIN rail	75 mm	65 mm	92 mm	CS028-02800.9-00-Datasheet-EN-GB.pdf
02800.9-01	120 V	108 V - 132 V	6 A	Screw fixing	90 mm	85 mm	107 mm	CS028-02800.9-01-Datasheet-EN-GB.pdf

Enclosure heater with fan

CS 028

Overview technical data

Product variants

Certificates

Your direct contact

Stego Worldwide