STEGO Ventilation cable gland DAK 284


DAK 284 | IP66 / IP67
Passive pressure compensation device for secure introduction of cables and leads into an enclosure. Evens out temperature-induced pressure differences between the inside and outside of the cabinet. Humidity escapes through a watertight filter. Condensation is prevented from forming.
  • Thread sizes: M12, M16 and M20
  • NBR sealing ring
  • Prevents ingress of water and dirt
  • Protection type IP66/IP67

Overview Technical Data

thread M12 x 1.5 / M16 x 1.5 / M20 x 1.5
0.5 - 3.0 mm with lock nut
plastic, light grey
IP66 / IP67 (EN 60529)
sealing gasket NBR
-20 to +80 °C (-4 to +176 °F)
VDE, UL File No. E471430, EAC

Make cut-out in enclosure wall and mount ventilation cable gland with lock nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burns.

Product Variants

Summary of your request

Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
Operating voltage
Voltage type Frequency Heating capacity Inrush current
Surface temperature Rec. pre-fuse
T (time-delay)
Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
free flow
Flow rate,
with filter
Setting range Setting range 2 Current
Nominal current
of socket
Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
Switching current
Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
Signal current
Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD

Your product inquiry

Your direct contact

STEGO Elektrotechnik GmbH
Kolpingstraße 21
74523 Schwäbisch Hall