SMART SENSOR CSS 014 digital IO-Link - measures temperature & humidity


CSS 014 | DC 24 V | Smart Sensor | IO-Link
The compact Smart Sensor CSS 014 electronically records temperature and humidity and converts the measured data into a digital IO-Link signal. The converted value signals can be utilized or further processed by a control or monitoring unit, e.g. a PLC control.
  • Digital interface
  • Easy clip and/or screw fixing
  • High accuracy
  • Quick connection (M12 plug-in connector)
  • Large temperature and humidity range
  • Various application areas (IEC 61010-1/DIN EN 61010-1)

Overview Technical Data

temperature, humidityevents, diagnosis, device data
IO-Link (Version 1.1)
M12 round plug connector, IEC 61076-2-101, 4-pin, A-coded, shielded
Reverse-polarity, short circuit, overvoltage protection
clip for 35 mm DIN rail, EN 60715 and screw fixing M5
plastic according to UL94 V-0, light grey
140 x 40 x 38 mm
~ 50 g
vertical (connection on top)
-40 to +85 °C (-40 to +185 °F)
< 90% RH (non-condensing)
IP20 (sensor only IP57) / III (SELV)
VDE, UL File No. E500143 (acc. to IEC 61010-1/DIN EN 61010-1), EAC
other measuring ranges on request

¹ The PCB (printed circuit board) is coated on both sides with a certified protective lacquer to protect against corrosion and for improvement of the tracking resistance.

Product Variants

Notice: Tolerance within +5 to 60°C (please request diagram for tolerances outside this range) / Tolerance within 20 to 80% RH

Summary of your request

Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
Operating voltage
Voltage type Frequency Heating capacity Inrush current
Surface temperature Rec. pre-fuse
T (time-delay)
Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
free flow
Flow rate,
with filter
Setting range Setting range 2 Current
Nominal current
of socket
Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
Switching current
Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
Signal current
Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD

Your product inquiry

Your direct contact

STEGO Elektrotechnik GmbH
Kolpingstraße 21
74523 Schwäbisch Hall