Suche
    en
    3040
    STEGO - IO-LINK actuator HUB AHC 072

    IO-LINK ACTUATOR HUB

    AHC 072 | DC 24 V | 3 Relay Outputs
    The IO-Link Actuator Hub AHC 072 can switch up to three actuators or loads on process level via relays. Switching commands for the loads are received via the IO-Link interface from a higher-level control unit: edge computer, cloud, PLC control, etc. The actuator hub supports both AC and DC loads, independent of their function or whether they have a communication interface.
    • Digital IO-Link interface
    • Easy DIN rail or screw mounting
    • M12 plug-in connector
    • For 1 to 3 actuators
    • Quick connection for actuators via Push-In terminals
    • Optical indicators (LEDs)
    to product variants

    Overview Technical Data

    1 to 3 contact makers (NO), with 3 optical indicators
    AC 240 V, 10 A
    DC 30 V, 10 A
    AC 16 A for 10 s
    2-pole Push-In terminals (3 x)
    IO-Link (version 1.1)
    M12 round plug connector, IEC 61076-2-101, 4-pin, A-coded
    Reverse-polarity, short circuit, overvoltage protection
    clip for 35 mm DIN rail, EN 60715 and
    screw mounting (M5)
    plastic according to UL94 V-0, light grey
    107 x 35 x 108 mm (116 mm with universal mounting bracket)
    ~ 160 g
    variable
    -40 to +70 °C (-40 to +158 °F) with 3 outputs with 2 A load each
    1-40 to +40 °C (-40 to +104 °F) with 3 outputs with 10 A load each¹
    -40 to +85 °C (-40 to +185 °F)
    < 90 % RH (non-condensing)
    ≤ 4000 m above sea leavel
    IP40 / III (SELV)
    CB No. DE1-63389
    in conformity with IEC 61010-1
    evaluated according to UL and CSA standards

    1 The max. operating temperature depends on the current (see diagram) and the number of loads.

    Product Variants

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD Inquiry CAD
    07200.2-00 plastic according to UL94 V-0, light grey Aktor Hub AHC 072 IO-Link (Version 1.1) 24 V 30 V 18 V DC 16 A 10 s 1.5 mm² / AWG 18 -40 ─ +70 °C 1,4 W -40 ─ +85 °C ≤90% rF ≤4000 m ≤90% rF 10 A Three active loads of 10 A each reduce the operating temperature to <+40 °C Verpolungsschutz, Kurzschlussfest, Überspannungsschutz Clip for 35 mm DIN rail, EN 60715 and Screw fixing M5 116 mm 107 mm 35 mm any desired 160 g III IP40 vorbereitet vorbereitet Catalogue

    Summary of your request

    Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
    max.     		Operating voltage
    min.     		Voltage type Frequency Heating capacity Inrush current
    max.     		Surface temperature Rec. pre-fuse
    T (time-delay)     		Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
    free flow     		Flow rate,
    with filter     		Setting range Setting range 2 Current
    consumption     		Nominal current
    of socket     		Power
    consumption     		Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
    max.     		Switching current
    min.     		Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
    Signal current     		Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
    difference     		Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
    cut-out     		Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD
    Send your selected items as an enquiry

    Your product inquiry
    Icon-Heizen Heating
    Icon-Kuehlen Cooling
    Icon-Regeln Regulating
    Icon-Beleuchten Lighting
    Start inquiry now

    Your direct contact

    +49 (0)791 95058-0
    info@stego.de

    STEGO Elektrotechnik GmbH
    Kolpingstraße 21
    74523 Schwäbisch Hall
    Germany

    Stego Worldwide

    Stego-Weltweit-Karte
    To the branches & dealers
    Start inquiry now