flat enclosure heater RC 016 by STEGO


RC 016 | 8 W, 10 W, 13 W
The small and flat enclosure heater provides the best protection against condensation in small control cabinets, enclosures and installation spaces. The PTC heating element transmits its heat onto an anodised aluminium profile. The compact contact heater is designed for long-term use.
  • Wider range of voltages for electrical connection
  • PTC heating element with dynamic response behaviour
  • Compact dimensions, example application: camera heater
  • High heating output per volume

Overview technical data

AC/DC 120-240 V¹ (min. 110 V, max. 265 V)
PTC resistor - temperature limiting
aluminium, anodised
2 x AWG 20 stranded wire, 300 mm (±8)
01651.0-00: L1 = 35 mm, L2 = 30 mm, L3 = 18 mm and Ø 3,2 mm
01662.0-00: L1 = 55 mm, L2 = 50 mm, L3 = 30 mm and Ø 4,5 mm
01673.0-00: L1 = 65 mm, L2 = 60 mm, L3 = 40 mm and Ø 4,5 mm
< +180 °C (+356 °F)
screw fixing
VDE: -45 to +70 °C (-49 to +158 °F)
UL: -45 to +40 °C (-49 to +104 °F)
-45 to +70 °C (-49 to +158 °F)
< 90% RH (non-condensing)
IP40 / II (double insulated)
VDE, UL File No. E234324 (according to UL 508A, NITW File on request), EAC
other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Product Variants

Notice: Heating capacity measured at +20 °C (+68 °F) ambient temperature

Summary of your request

Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
Operating voltage
Voltage type Frequency Heating capacity Inrush current
Surface temperature Rec. pre-fuse
T (time-delay)
Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
free flow
Flow rate,
with filter
Setting range Setting range 2 Current
Nominal current
of socket
Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
Switching current
Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
Signal current
Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD

Your product inquiry

Your direct contact

STEGO Elektrotechnik GmbH
Kolpingstraße 21
74523 Schwäbisch Hall