STEGO enclosure heater CS 060


CS 060 | 50 W to 150 W
This is a compact enclosure heater with PTC heating element for guaranteed protection against condensation inside control cabinets and enclosures. The convection heater is safe to touch thanks to its plastic casing, protecting users from heat exposure. This heater is also available as a series with pre-set thermostat (tamper-proof thermostat): CSF 060
  • Safe to touch, low surface temperature
  • Quick to mount onto DIN rail 35 mm
  • This enclosure heater is designed for long-term use
  • PTC heating element

Overview technical data

AC/DC 120 - 240 V¹ (min. 110 V, max. 265 V)
PTC resistor - temperature limiting
< +80°C (+176°F), except upper protective grille
4-pole terminal 2.5mm², torque 0.8 Nm max.
plastic according to UL94 V-0, black
clip for 35mm DIN rail, EN 60715
vertical airflow (air outlet up, connection on bottom)
-45 to +70 °C (-49 to +158 °F)
< 90% RH (non-condensing)
IP20 / II (double insulated)
VDE, UL File No. E150057, EAC
other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Product variants

Notice: Heating capacity ambient temperature-see Heating capacity/ ambient temperature diagram; Air outlet temperature measured 50mm above protective grille

Summary of your request

Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
Operating voltage
Voltage type Frequency Heating capacity Inrush current
Surface temperature Rec. pre-fuse
T (time-delay)
Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
free flow
Flow rate,
with filter
Setting range Setting range 2 Current
Nominal current
of socket
Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
Switching current
Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
Signal current
Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD

Your product inquiry

Your direct contact

STEGO Elektrotechnik GmbH
Kolpingstraße 21
74523 Schwäbisch Hall