STEGO Drainage device DD 084


DD 084 | IP66 / IP67 / IP69K
Drainage device for draining condensation from enclosures. Conforms to protection type IP66. No spray water can enter as a water-permeable membrane drains the cabinet via capillary action.
  • Protection type IP66
  • Easy to install
  • Weather-resistant, spray water protection

Overview Technical Data

thread M50 x 1.5 with nut (wrench size 60mm, housing 50mm)
< 6 Nm
< 17.5 mm
plastic according to UL94 V-0, umbra grey,
weather proof and UV light resistant according UL746C (f1)
0 mm (at 0.5 mm wall thickness)
sealing gasket NBR
approx. 200 ml/h at a water column of 5mm
Ø 60 x 49.5 mm
horizontal, lowest point
-45 to +70 °C (-49 to +158 °F)
Material adheres to limit values in accordance with RoHS3

Make cut-out Ø 50.5+0.5mm in enclosure bottom and mount drainage device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.

Product Variants

Summary of your request

Art. No. Connection casing Casing Productname Series Heating element Heater body Model Axial fan Operating voltage Operating voltage
Operating voltage
Voltage type Frequency Heating capacity Inrush current
Surface temperature Rec. pre-fuse
T (time-delay)
Connection Connection PE Air outlet temperature Switch-off temperature Switch-off temperature 2 Switch-on temperature Switch-on temperature 2 Drilling template Operating temperature Flow rate,
free flow
Flow rate,
with filter
Setting range Setting range 2 Current
Nominal current
of socket
Average noise level Enclosure cut-out Enclosure cut-out Storage temperature Storage humidity Ambient temperature Operating humidity Speed Switching capacity
Switching current
Load resistance (external) External Sensor Measuring range Measuring range 2 Note Note 2 Note 3 Note 4 Reaction time Contact type Service life Operation indicator Control contact -
Signal current
Electrical protection Switch Socket Material Material sealing Air permeability Mounting Air intake/Air outlet Filter material Measuring signal Switch temperature
Lamp type Luminous flux Light colour Length / Depth Width Height Diameter Installation depth Fitting position Mounting frame Weight Sensor element Protection class Protection type Protection type UL VDE UL EAC METRO ATEX Ex Protection type Gases Ex Protection type Mine applications Ex Protection type Dusts Temperature class Temperature safety
Accessory Accessory 2 Accessory 3 Accessory 4 Art. No. Accessory Art. No. Accessory 2 Art. No. Accessory 3 Art. No. Accessory 4 Catalogue Article CAD

Your product inquiry

Your direct contact

STEGO Elektrotechnik GmbH
Kolpingstraße 21
74523 Schwäbisch Hall